View LPD4380-PF-TBS-X_4560306.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only TAPE AND BOX TYPE LED LAMPS
Pb
Lead-Free Parts
LPD4380-PF/TBS-X
DATA SHEET
DOC. NO : QW0905-LPD4380-PF/TBS-X REV. DATE : : A 28 - Feb. - 2008
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LPD4380-PF/TBS-X Page 1/5
Package Dimensions
P2
H
H2 H1 L W0 W1 W3 W2
D
P1
F P
T
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LPD4380-PF/TBS-X
Package Dimension
Page 2/5
Description
The LPD4380-PF/TBS-X series are silicon planar P/N photodiodes incorporated in plastic package that simultaneously serve as filter and are also Transparent for infrared emission their terminals are soldering tabs arranged in 2.54mm center to center spacing due to their design the diodes can vertically be assembled on pc boards arrays can be realized by multiple arrangement versatile photodetectors are suitable for diodes as well as voltaic cell operation the signal noise ratio is particularly favorable even at low illuminance the P/N photodiode are outstanding for low junction capacitance high cut-off frequency and fast switching times. They are particularly suitable for IR sound transmission and remote control the cathode of LPD4380-PF/TBS-X photodiode is marked by a stamping on the package edge
3.7 5.0
6.5 1.5MAX 12.0MIN 0.5 TYP 1.0MIN 2.54TYP
NOTE:1.All dimension are In millimeters tolerance Is 0.25 unless otherwise noted 2.Specifications are subject to change without notice
*MAXIMUN RATINGS (TA=25) Characteristic
Reversr Break Down Voltage Power Dissipation Operating Temperature Storage Temperature
Symbol
VBR PD Topr Tstg
Rating
30 150
nit
V mW
-30 +60 -40 +60

* ELECTRICAL CHARACTERISTICS AT (TA=)
Characteristic
Dark Current Short Circuit Current Open Circuit Voltage Reverse Light Current Total Capacitance Peak Wavelength of Max Sensitivity Rise Time,Fall Time
Symbol
ID Isc Voc Ira CT
Test Condition
VR=10V Ee=0mW/c VR=5V P=940nm Ee=0.5mW/c
Min
2.0 _ 2.0
Typ
1.0 3.0 350 3.0 20 940 50
Max
30
Unit
nA uA mV uA
P=940nm
Ee=0.5mW/c VR=5V P=940nm Ee=0.5mW/c VR=3V f=1MHZ Ee=0mW/c

pF nm ns
smax
tr,tf VR=10V RL=1K
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LPD4380-PF/TBS-X *Dimension Symbol Information SPECIFICATIONS SYMBOL ITEMS OPTION SYMBOL CODE
-------------------
Page 3/5
Minimum mm inch
0.15 0.09
-------
Maximum mm
4.2 3.0 2.0 18.5 22.5 26.5 23.5 20.9 25.0 25.5 20.0 19.4 22.0 21.5 19.0 36 11
inch
0.17 0.12 0.08 0.73 0.89 1.04 0.93 0.82 0.98 1.0 0.79 0.76 0.87 0.85 0.75 1.42 0.43 0.51 0.23 0.3 0.06 0.38 0.61 0.16 0.75
Tape Feed Hole Diameter Component Lead Pitch Front-To-Rear Deflection
D F
H
3.8 2.3
-------
TBS-1 TBS-2 TBS-3 TBS-5 TBS-6 Feed Hole To Bottom Of Component TBS-7 TBS-8 TBS-9 TBS-10 TBS-11 TBS-12 TBS-13 Feed Hole To Overall Component Height Lead Length After Component Height Feed Hole Pitch Lead Location Center Of Component Location Overall Taped Package Thickness Feed Hole Location Adhesive Tape Width Adhesive Tape Position Tape Width
-------------------------------------------------------------
17.5 21.5 25.5 22.5 19.9 H1 24.0 24.5 19.0 18.4 21.0 20.5 18.0 H2 L P P1 P2 T W0 W1 W2 W3 12.4 4.4 5.1
-------------
0.69 0.85 1.0 0.89 0.78 0.94 0.96 0.75 0.72 0.83 0.81 0.71
-------
W0 0.49 0.17 0.2
-------
13 5.8 7.7 1.42 9.75 15.5 4.0 19
8.5 14.5 0 17.5
0.33 0.57 0 0.69
REMARK:TBS=Tape And Box Straight Leads
* Dimensions Symbol Information
Specification
* Package Dimensions
maxmum mm 340 275 60 inch 13.4 10.8 2.4
Description
Overall Length Overall Width Overall Thickness
Symbol
minimum mm inch 13.0 10.4 1.97
L W H
330 265 50
Quantity/Box
2000PCS
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LPD4380-PF/TBS-X Page 4/5
Soldering Condition(Pb-Free) 1.Iron: Soldering Iron:30W Max Temperature 350C Max Soldering Time:3 Seconds Max(One Time) Distance:2mm Min(From solder joint to body)
2.Wave Soldering Profile Dip Soldering Preheat: 120C Max Preheat time: 60seconds Max Ramp-up 2 C/sec(max) Ramp-Down:-5C/sec(max) Solder Bath:260 C Max Dipping Time:3 seconds Max Distance:2mm Min(From solder joint to body)
Temp( C) 260 C3sec Max
260
5 /sec max
120
2 /sec max Preheat
60 Seconds Max
25 0 0
50
100
150
Time(sec)
Note: 1.Wave solder should not be made more than one time. 2.You can just only select one of the soldering conditions as above.
LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only
PART NO. LPD4380-PF/TBS-X Page 5/5
Reliability Test:
Test Item
Test Condition
1.Under Room Temperature 2.If=20mA 3.t=1000 hrs (-24hrs, +72hrs)
Description
This test is conducted for the purpose of detemining the resistance of a part in electrical and themal stressed.
Reference Standard
MIL-STD-750: 1026 MIL-STD-883: 1005 JIS C 7021: B-1
Operating Life Test
High Temperature Storage Test
1.Ta=105 5 2.t=1000 hrs (-24hrs, +72hrs)
The purpose of this is the resistance of the device which is laid under condition of high temperature for hours.
MIL-STD-883:1008 JIS C 7021: B-10
Low Temperature Storage Test
1.Ta=-40 5 2.t=1000 hrs (-24hrs, +72hrs)
The purpose of this is the resistance of the device which is laid under condition of low temperature for hours.
JIS C 7021: B-12
High Temperature High Humidity Test
1.Ta=65 5 2.RH=90 %~95% 3.t=240hrs 2hrs
The purpose of this test is the resistance of the device under tropical for hours.
MIL-STD-202:103B JIS C 7021: B-11
Thermal Shock Test
1.Ta=105 5&-405 (10min) (10min) 2.total 10 cycles
The purpose of this is the resistance of the device to sudden extreme changes in high and low temperature. This test intended to determine the thermal characteristic resistance of the device to sudden exposures at extreme changes in temperature when soldering the lead wire.
MIL-STD-202: 107D MIL-STD-750: 1051 MIL-STD-883: 1011
Solder Resistance Test
1.T.Sol=260 5 2.Dwell time= 10 1sec.
MIL-STD-202: 210A MIL-STD-750: 2031 JIS C 7021: A-1
Solderability Test
1.T.Sol=230 5 2.Dwell time=5 1sec
This test intended to see soldering well performed or not.
MIL-STD-202: 208D MIL-STD-750: 2026 MIL-STD-883: 2003 JIS C 7021: A-2

▲Up To Search▲

Price & Availability of LPD4380-PF-TBS-X

	To Download LPD4380-PF-TBS-X Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .